Penis Enlargment | Page 6

Not Available
Circle Device. It
wasn't very good.Use denim or other cloth, lead weights (used
wheel balancing weights), needle and thread,
rubber bands.
l
Start with a 20x20 cm piece of materiall
Cut out a 10 cm x 10 cm corner, leaving an "L"
shapel
Fold one flap over to hold weightl
Sew it closed, and wrap around penis, holding in
pace with elastic bands (or Velcro). l

Sock
Crude, but a quick way to test the idea.
You will need: An old sock, some coins, rubber bands.Put coins in a sock.
l
Wrap sock around your penis (pull your penis while doing this). Keep w\
rapping (to
keep coins from falling out!).l
Hold in place with 2 or 3 rubber bands. It's not perfect, but you'll get\
the idea.l

Light penis weights
http://www.fortunecity.co.uk/village/loverslane/178/docs/light_penis_wei\
ghts.htm (2 of 3) [8/21/2001 12:42:59 PM]

Light penis weights
http://www.fortunecity.co.uk/village/loverslane/178/docs/light_penis_wei\
ghts.htm (3 of 3) [8/21/2001 12:42:59 PM]

Mechanical attachmentsThere are several ways to make a secure, comfortable
attachment device for weights or string pulling.
Swim cap - condom and direct wrap techniques
Pipe insulation, surgical tubing, tape
The Swim Cap
Cheap, Comfortable (once you master the technique), inexpensive
l
Materials : rubber (latex) swim cap (from sporting goods store), string.
Cut a 4" x 8" (10 X 20 cm) piece from the swim cap.
l
Clean it well with detergent and dry. The stickier the latex, the less t\
ightly you will need
to wrap it - wash repeatedly if necessary!l
Condom technique
(photos by Peabody - THANK YOU!)
Wrap about 2" (5 cm) of the latex around a piece of PVC pipe (or othe\
r cylinder -
I've used a 'jumbo' marker which I keep at my desk. Roll with the glossy\
side in.
Make sure first wrap layer has tension. Roll latex off PVC to make a 'co\
ndom.'
Roll 'condom' over glans (head) of penis. When it's about halfway on, \
it will grab
enough to easily roll the rest of way. Latex should extend at least 1/4"\
past the
head of your penis. Pull firmly to test grip. Once you have a secure con\
nection, a
small S-hook makes it easy to hang weights or a add string.
Direct wrap

Mechanical penis attachment techniques
http://www.fortunecity.co.uk/village/loverslane/178/docs/attach.htm (1 \
of 2) [8/21/2001 12:43:21 PM]

This is a fast technique that takes some practice to master. Pull
foreskin back. Tightly wrap rubber around glans and shaft of penis
several times . Add an elastic band or tape to keep rubber from
unwrapping.


Foam pipe insulation, or the 'Bib' hanger
Somebody told me about using a rubber pipe clamp. I substituted foam pip\
e
insulation and put it on my web site. Someone else improved on the desig\
n.
Pretty cool the way these things develop.
Foam pipe insulation is comfortable and warm. Though a bit awkward to
attach and remove, this is comfortable and cheap, and allows considerabl\
e
weight to be used.
I'm not sure what the clamp is in this photo. You can use a hose clamp, \
but I
recommend fitting your electric screwdriver with a non-slip screwdriver \
blade
(flat part in a cylinder of metal to prevent it coming off the screw an\
d
potentially gouging you).
Loop - NOT recommended
Many commercial stretching devices use this kind of attachment. It is
dangerous because it puts all stress on a small portion of the penis whe\
re the
main nerves are located, limiting the amount of weight you can hang
comfortably. I found 6 pounds (2.73 kg) was the maximum weight I could\
use.
Latex (surgical) tubing is sold by the foot at Home Depot.
Tape - NOT recommended
By wrapping your penis in self-adhesive tape, you can build up an area t\
o make
it easier to hang a weight or stretcher. The tape is relatively expensiv\
e, and not
very comfortable.


Mechanical penis attachment techniques
http://www.fortunecity.co.uk/village/loverslane/178/docs/attach.htm (2 \
of 2) [8/21/2001 12:43:21 PM]

Mechanical Pulling
Pull with weights
What materials will I need? For weights, you can use anything:
barbell weights, lead tire weights in a small stuff sack, a plastic jug
with water, etc., etc. If you can make it small enough, you can wear
shorts and hang penis and weight over the edge of your computer
chair as you work.
How much weight? Start with 2-3 pounds (1-1.5 kg). Each week, add
weight in 1/2 pound (.25 kg) increments, or more if comfortable.
Work up to ten pounds (4.5 kg) or more.
How long? Hang weight for 10 minutes, then remove for 10 minutes. You can increase\
this
time later, but always monitor carefully. Remember to remove weights reg\
ularly!
How often? I hung weights for one full hour (takes a total of two hours with break\
s) morning
and afternoon, every day.
What else? Do PC exercises every few minutes while hanging to encourage circulation\
. Stop
immediately if you experience pain, excessive coldness, numbness or discoloration.
Pull around your waist
This is awkward to put on and remove, but as long as
somebody's trying to sell it for DM 298 (~$US
160)(www.penisplus.com.), you might as well know about it.

You can also do it with just an Ace bandage:
In either case,
Continue reading on your phone by scaning this QR Code

 / 22
Tip: The current page has been bookmarked automatically. If you wish to continue reading later, just open the Dertz Homepage, and click on the 'continue reading' link at the bottom of the page.