Penis Enlargment | Page 5

in his ability to get harder, last longer and \
eventually, retain his
erection even after ejaculation. Care must be taken that sufficient Vase\
line is used to keep the
penis shaft well lubricated while performing the exercise, otherwise the\
rather excessive
friction may burn or bruise the flesh. A slight; pelvic tenderness or so\
reness may be felt the
first few days, but this will soon pass, and even the most vigorous milk\
ing will not cause it to
return. When, after several months (or perhaps a year), the penis has \
reached the size the
individual desires, the exercise may be performed only occasionally (pe\
rhaps once a week).
By so doing the penis will remain permanently enlarged and the occasiona\
l massage will keep
it well toned and in a state of super condition and health.

Swank penis milking article
http://www.fortunecity.co.uk/village/loverslane/178/docs/milking-swank.h\
tm (2 of 3) [8/21/2001 12:42:48 PM]

The milkings should be performed rather swiftly, using first one hand an\
d then the other in a
sort of rhythmic motion; after the exercise is performed the individual \
may grasp the penis at
its base with the thumb and the first two fingers and, cupping the testi\
cles in the other hand to
protect them, slap the penis swiftly up and down from twenty five to fif\
ty repetitions; this
limbers it up after the milkings and helps to relax the connective muscl\
es.
The growth results from this milking exercise are not unusual or mysteri\
ous... not even a
miracle. It is the partial vasocongestion, along with the vigorous milki\
ng, that engenders
increased penis size. Results will be obtained regardless of the individ\
ual's age, as long as
partial tumescence is present when the really vigorous milkings are perf\
ormed.
The exercise should be performed only once a day, five days a week. An e\
xcellent time to
perform it is before taking a shower; the warm water further relaxes the\
connective muscles
and the lubricant can then be washed from the penis.
I know of no other exercise or stretching method which will both lengthe\
n and thicken the
penis. The exercise does require persistence and patience, but the indiv\
idual who truly desires
to possess a larger penis will find no better way to achieve definite re\
sults.

Swank penis milking article
http://www.fortunecity.co.uk/village/loverslane/178/docs/milking-swank.h\
tm (3 of 3) [8/21/2001 12:42:48 PM]

Light penis weights
By wearing a light weight attached to your penis for many hours a
day, some people claim you can make real gains. It certainly seems
like it should work. I'd be interested in hearing from someone who's
actually had success with this technique.
This type of weight could also help restore foreskin. If you don't want
to grow foreskin, make sure the glans (head) of the penis carries the
weight. You'll probably want some cushioning, since it won't be very
comfortable.
I expect the tribe member simply ties a rag and a rock to their dicks,
since their activity is no secret. In our case, a little more discretion\
is
needed. I don't have a great homemade solution, but here are a couple
of ideas you can play with.
Golf club weights
Photo: Peabody.
Swim cap is used to hold these weights in place
Experiment with one-pound wrist weights or golf club swing weights in th\
e sporting goods
section, or any other flexible weight you can strap comfortably to your \
penis.
Homemade 'Circle Device'
(see Circle Device ). Very compact, but difficult to construct. You will need: lead, or
(safer) lead-free pipe solder, container with sand or plaster of Paris\
, heat source (camp
stove, kitchen stove), ladle to melt metal in, large vice and hammer (\
not needed for lost
wax technique).
Cast two flat metal ingots approximately 6 cm x 5 cm x .75 cm, using a s\
and or
plaster mold. Caution: molten metal can be dangerous.
l
When cool, use hammer and vice to curve them (this is noisy and hard wo\
rk!).l

Light penis weights
http://www.fortunecity.co.uk/village/loverslane/178/docs/light_penis_wei\
ghts.htm (1 of 3) [8/21/2001 12:42:59 PM]

Thoroughly cover in duct tape or Plasti-Grip (the stuff used on tool ha\
ndles) to
avoid lead contact with skin.
Put tape on both sides to create a hinge. Do this while holding the piec\
es as close
as possible to the actual position they'll be in when used, to avoid pin\
ching.l
Hold in place with two rubber bands.l
Lost wax casting: Alternately, form two wax slabs approximately 6 cm x 5\
cm x .75 cm, and
curve them to a radius approximately twice that of your flaccid penis. F\
ill a wide paper cup or
other disposable container with enough wet plaster to accommodate both w\
ax forms. Set them
on end in the plaster, and let the plaster set for an hour or more. Over\
night is best.
Using your heat source, heat the plaster until the wax melts and runs ou\
t. (Don't drip the
molten wax onto an open flame!!!) You can use hot water to melt the wax\
, but let the mold
dry thoroughly before pouring molten metal!
Pour molten metal into forms.
After a few minutes, drop the mold into cold water. When cool, break awa\
y plaster and clean
up your cast ingots. File them to remove sharp edges.
Bean Bag
I made one of these to mimic the