The Consumer Viewpoint | Page 2

Mildred Maddocks
be overestimated. No machine on the market, of any type, is one hundred per cent perfect and none on the market should, therefore, be taken as a standard to be met by the new manufacturer. It is a patchwork, only, that is obtained by one common method used to obtain a newly designed machine. Namely, the manufacturer purchases every type of machine, already marketed to perform a given work, and adapts one part from one machine, another part from a second machine and perhaps still another part from a third machine. Such a design must always be a compromise, and it is seldom possible to obtain the original working efficiency of the several parts in the new machine because of the necessary compromises.
A second point that the manufacturer is apt to overlook is the importance of including the most minute of details in his general high standard of manufacture. For instance, he elects to use copper for a water container, but forgets to provide that every bolt and rivet and screw, no matter how small, shall be of a rust-resisting metal. The small part capable of rusting is as much an eyesore to the purchaser and in certain conditions can do as great damage as though the manufacturer had not spent the major sum to insure his rust-resisting container.
And a third point: sometimes a manufacturer neglects to make certain of a perfection of detail in the factory that will produce one hundred per cent. of uniformity in his product. Thus vacuum cleaner manufacturers, merely by installing an equipment that would measure for them, under actual conditions of service, the correct air displacement of the particular machine tested, could eliminate any possibility of lack of uniformity in their product. Further, it would take no more time for the inspection than is at present accorded to the routine reading of current consumption. Yet up to this time we know of no vacuum cleaner factory that has installed this comparatively simple and inexpensive equipment.
When attempting to market a product to women, factory faults are of far greater importance than when marketing a product for the use of men. The latter understand the difficulties of factory production and accept the occasional defective product as a routine. They expect it to be credited. They expect prompt correction on the part of the manufacturer or dealer, and, once adjusted, with them the matter usually ends. Not so with the average woman purchaser. First of all, and last of all, she remembers that something was the matter with the machine for which she paid her money. Oftentimes only the most drastic and unusual service on the part of the manufacturer will take away the sting that was left in her mind by the original transaction. In club, church, or in confidential chat at home, somewhere she leaves the impression that there is still something the matter or she would not have gotten a poor machine. The advertising value, therefore, of a uniformity of product cannot be overestimated. No amount of costly after-service will compensate for the lack of it.

THE VALUE OF PROPER DEMONSTRATION BY THE DEALER.
A manufacturer sometimes fails to satisfy the woman consumer because he is attempting to satisfy a dealer's demand for "flashy" rather than practical selling points and, therefore, loses sight of the value to him of a perfect functioning of his device. Exclusive points of design that can be used for a spectacular demonstration have been up to this time perhaps the strongest of selling aids; but manufacturers and dealers alike are beginning to realize that they have an element of danger. Thus, the confetti test for vacuum cleaners was an unfortunate misuse of the machine. It has never convinced the woman purchaser that it would accomplish the more trying task of removing "grimed-in" soil, even while it fascinated her as a spectator and even while she left as a purchaser. She doubted her own machine because of the unconvincing test.
It was only a short time ago that in one of the trade papers dealing with household equipment there appeared an editorial endorsement, and an exceedingly strong one at that, of a certain dealer display which had attracted great crowds on both sidewalk and street before the dealer's window. The crowd had been drawn by the display of a number of different washing machines grouped around a central machine which was absorbing the "limelight." It had a swinging wringer and the wringer was revolving at so rapid a rate it became plain that any woman who stepped in the way of that particular type of wringer was doomed to a severe blow if not a fall. The idea of the dealer in using such a display was of the "stop-look-listen" variety, and he obtained all he could desire of this variety of interest.
Continue reading on your phone by scaning this QR Code

 / 9
Tip: The current page has been bookmarked automatically. If you wish to continue reading later, just open the Dertz Homepage, and click on the 'continue reading' link at the bottom of the page.