Marvels of Modern Science | Page 9

a large measure should be accorded the honor of blazoning the way for many of the intellectual giants who came after him. Of course those who went before him, who discovered the principles of the electric telegraph made it possible for the Hertzian waves to be utilized in wireless.
It is easy to understand the wonders of wireless telegraphy when we consider that electric waves transverse space in exactly the same manner as light waves. When energy is transmitted with finite velocity we can think of its transference only in two ways: first by the actual transference of matter as when a stone is hurled from one place to another; second, by the propagation of energy from point to point through a medium which fills the space between two bodies. The body sending out energy disturbs the medium contiguous to it, which disturbance is communicated to adjacent parts of the medium and so the movement is propagated outward from the sending body through the medium until some other body is affected.
A vibrating body sets up vibrations in another body, as for instance, when one tuning fork responds to the vibrations of another when both have the same note or are in tune.
The transmission of messages by wireless telegraphy is effected in a similar way. The apparatus at the sending station sends out waves of a certain period through the ether and these waves are detected at the receiving station, by apparatus attuned to this wave length or period.
The term electric radiation was first employed by Hertz to designate waves emitted by a Leyden jar or oscillator system of an induction coil, but since that time these radiations have been known as Hertzian waves. These waves are the underlying principles in wireless telegraphy.
It was found that certain metal filings offered great resistance to the passage of an electric current through them but that this resistance was very materially reduced when electric waves fell upon the filings and remained so until the filings were shaken, thus giving time for the fact to be observed in an ordinary telegraphic instrument.
The tube of filings through which the electric current is made to pass in wireless telegraphy is called a coherer signifying that the filings cohere or cling together under the influence of the electric waves. Almost any metal will do for the filings but it is found that a combination of ninety per cent. nickel and ten per cent. silver answers the purpose best.
The tube of the coherer is generally of glass but any insulating substance will do; a wire enters at each end and is attached to little blocks of metal which are separated by a very small space. It is into this space the filings are loosely filled.
Another form of coherer consists of a glass tube with small carbon blocks or plugs attached to the ends of the wires and instead of the metal filings there is a globule of mercury between the plugs. When electric waves fall upon this coherer, the mercury coheres to the carbon blocks, and thus forms a bridge for the battery current.
Marconi and several others have from time to time invented many other kinds of detectors for the electrical waves. Nearly all have to serve the same purpose, viz., to close a local battery circuit when the electric waves fall upon the detector.
There are other inventions on which the action is the reverse. These are called anti-coherers. One of the best known of these is a tube arranged in a somewhat similar manner to the filings tube but with two small blocks of tin, between which is placed a paste made up of alcohol, tin filings and lead oxide. In its normal state the paste allows the battery current to get across from one block to another, but when electric waves touch it a chemical action is produced which immediately breaks down the bridge and stops the electric waves, the paste resumes its normal condition and allows the battery current to pass again. Therefore by this arrangement the signals are made by a sudden breaking and making of the battery circuit.
Then there is the magnetic detector. This is not so easy of explanation. When we take a piece of soft iron and continuously revolve it in front of a permanent magnet, the magnetic poles of the soft iron piece will keep changing their position at each half revolution. It requires a little time to effect this magnetic change which makes it appear as if a certain amount of resistance was being made against it. (If electric waves are allowed to fall upon the iron, resistance is completely eliminated, and the magnetic poles can change places instantly as it revolves.)
From this we see that if we have a quickly changing magnetic field it will induce or set up an