History of Steam on the Erie Canal

Steam on the Erie Canal, by
Anonymous

Project Gutenberg's History of Steam on the Erie Canal, by
Anonymous This eBook is for the use of anyone anywhere at no cost
and with almost no restrictions whatsoever. You may copy it, give it
away or re-use it under the terms of the Project Gutenberg License
included with this eBook or online at www.gutenberg.net
Title: History of Steam on the Erie Canal
Author: Anonymous
Release Date: December 28, 2006 [EBook #20209]
Language: English
Character set encoding: ISO-8859-1
*** START OF THIS PROJECT GUTENBERG EBOOK HISTORY
OF STEAM ON THE ERIE CANAL ***

Produced by Bryan Ness, Irma Špehar and the Online Distributed
Proofreading Team at http://www.pgdp.net (This book was produced
from scanned images of public domain material from the Google Print
project.)

HISTORY OF STEAM ON THE ERIE CANAL.

Appeal for the Extension of the Act of April, 1871, "to Foster and
Develop the Inland Commerce of the State,"
FOR THE BENEFIT OF THE CANALS AND THE COMMERCIAL
COMMUNITY.
NEW YORK, JANUARY, 1873.
NEW YORK: EVENING POST STEAM PRESSES, 41 NASSAU
STREET, COR. LIBERTY. 1873.
With Respects of the Author,
155 Broadway, N. Y.
HISTORY OF STEAM ON THE ERIE CANAL.
SCREW PROPELLERS FROM 1858 TO 1862.
During the maple sugar season of the spring of 1858, a well-to-do
farmer, of western New York, whittled out a spiral or augur-like
screw-propeller, in miniature, which he thought admirably adapted to
the canal. He soon after went to Buffalo, and contracted for a boat to be
built, with two of his Archimedean screws for propulsion by steam.
Although advised by his builders to substitute the common four-bladed
propellers, he adhered to his original design, and with one propeller at
either side of the rudder--called "twin-propellers"--she was soon ready
for duty. She is the vessel known to history as the Charles Wack.
She carried three-fourths cargo and towed another boat with full cargo,
and made the trip from Buffalo to West Troy in seven days, total time,
averaging two miles per hour. But she returned from Troy to Buffalo,
with half freight, in four days and sixteen hours, net time; averaging
three and one-twelfth miles per hour, without tow.
This initiated the series of steamers from 1858 to 1862, and, with others
that soon followed, created a general enthusiasm in behalf of steam
transportation, which led to a trip through the canal that fall, on a

chartered steam-tug, by the Governor of the State, the Canal Board, and
other notables, and with public receptions, speeches, &c., at different
cities along the route.
That boat was soon followed by the S. B. Ruggles, a first-class steam
canal-boat, built by the Hon. E. S. Prosser, of Buffalo, with a first-class
modern propeller, and with double the engine capacity of the former.
The P. L. Sternburg soon followed, and was a first-class boat, with
modern twin-propellers, but with less engine capacity than the Wack.
The same season there were some local steamers built to run regularly
between different cities on the line of the canal.
The following season of 1859 was the most active year the Erie Canal
has ever known in regard to steam.
The C. Wack was sold to Mr. Prosser, who took out her Archimedean
propellers, and substituted a modern propeller, and doubled her engine
capacity, and reproduced her as the City of Buffalo.
The Gold Hunter was produced by the Western Transportation
Company, of Buffalo. She was a short, oblong tub, with a square,
box-like bow, and rounded stern, designed only to carry machinery and
coal, and was to be recessed into the stern of ordinary horse-boats by
cutting away an equivalent space therefrom. She was designed to make
a trip on the canal, and be immediately transferred to another boat for
return trip, thus to avoid the usual loss of time at the termini of the
canal. She was abandoned after a brief trial.
The canal-boat Niagara had the Cathcart propeller supplied, which
consisted of a union of the propeller and rudder by a universal joint in
the shaft, and so adjusted as to unite them for steerage purposes. This
design was tried on the steamer Cathcart, upon the Chesapeake and
Ohio Canal, in 1858, and with considerable newspaper eclat.
The Rotary, of New York, was a new steamer for freighting purposes,
with a rotary engine and common propeller. This occupied but little

space, and worked prettily on exhibition.
The Eclipse, of New York, was new, and had oscillating propeller
engines.
SCREW-TUGS.
The Gov. King was a medium-sized New York harbor propeller, and
made repeated trips with three boats in tow, and one trip with five boats.
She was so slow as to be unremunerative, as compared with horses.
The Western Transportation Co., after the failure of the Gold Hunter,
built two powerful