Carving and Serving | Page 8

right side of the leg, and then on the left. Bend the leg over toward you, and you will see where the flesh joins the body and also where the joint is, for the bone will move in the joint. Cut through the flesh close to the body, first on the right of the joint and then on the left, and as you bend the leg over, cut the cord and gristle in the joint, and this will free the leg from the body. Find the joint in the leg and divide it neatly. Work the wing until you see where the joint is, then cut through the flesh on the shoulder, bend the wing up and cut down through the gristle and cord. Make a straight clean cut, leaving no jagged edges. Divide the wing in the joint, and then remove the leg and wing from the opposite side, and divide in the same way. Make an incision in the skin near the vent, cut through the membrane lying between the breast and the tail down to the backbone on each side, remove the entrails, and break off the backbone just below the ribs. Separate the side-bones from the back by cutting close to the backbone from one end to the other on each side. This is a little difficult to do; and in your first experiment it would be better not to divide it until after boiling it, as it separates more easily after the connecting gristle has been softened by cooking. Take off the neck close to the back by cutting through the flesh and twisting or wringing it until the bone is disjointed.
Cut off the wish-bone in a slanting direction from the front of the breast-bone down to the shoulder on each side. Cut through the cartilage between the end of the collar-bone and the breast. Cut between the end of the shoulder-blade and the back down toward the wing-joint, turn the blade over toward the neck, and cut through the joint.
This joint in the wing, collar-bone, and shoulder-blade is the hardest to separate. Remove the breast from the back by cutting through the cartilage connecting the ribs; this can be seen from the inside. The breast should be left whole and the bone removed after stewing; but if the chicken is to be fried you may remove the bone first.
It is not necessary in boiling a chicken to divide it so minutely, for the wings and legs can be disjointed, and the side-bones and breast separated from the back more easily after cooking; but it is valuable practice, and if one learns to do it neatly it will help in carving a boiled fowl or roast turkey.
In arranging a fricasseed chicken on the platter, put the neck and ribs at the left end of the dish and the backbone at the right end. Put the breast over the ribs, arrange the wings on each side of the breast, the second joints next to the side-bones, and cross the ends of the drumsticks over the tail.
BOILED FOWL OR TURKEY.
Fowls or turkeys for boiling should be trussed with the ends of the legs drawn into the body through a slit in the skin, and kept in place with a small skewer. Turn the tip of the wing over on the back. Cut off the neck, not the skin, close to the body, and after putting in the stuffing, fasten the skin of the neck to the back. Put strips of cloth round it, or pin it in a cloth, to keep it white and preserve the shape.
In carving, place it on the platter with the head at the left. Put the fork in firmly across the breast-bone. With the point of the knife cut through the skin near the tail, and lift the legs out from the inside. Then cut through the skin between the legs and body, bend the leg over, and cut across through the joint. Cut from the top of the shoulder down toward the body until the wing-joint is exposed, then cut through this, separating the wing from the body. Remove the leg and wing from the other side. Shave off a thin slice on the end of the breast toward each wing-joint, slip the knife under at the top of the breast-bone, and turn back the wish-bone.
Capons and large fowls may be sliced thinly across the breast in the same manner as a roast turkey. But if the fowl be small, draw the knife along the edge of the breast-bone on each side, and lay the meat away from the bone; the fillets will separate easily. Then divide the meat across the grain. Separate the collar-bone from the breast. Slip the knife under the shoulder-blade, turn it over, and separate at the